Blog - Best Courses to Learn

Joe Stone Joe Stone

0 Course Enrolled • 0 Course Completed

Biography

JN0-683 Study Guide, New Guide JN0-683 Files

What's more, part of that ActualCollection JN0-683 dumps now are free: https://drive.google.com/open?id=11CXE9uQzVu-nRulqF-hyu09orF_-juHz

With JN0-683 practice materials, you don't need to spend a lot of time and effort on reviewing and preparing. For everyone, time is precious. Office workers and mothers are very busy at work and home; students may have studies or other things. Using JN0-683 Guide questions, you only need to spend a small amount of time to master the core key knowledge, pass the JN0-683 exam, and get a certificate.

Juniper JN0-683 Exam Syllabus Topics:

Topic
Details

Topic 1

Data Center Deployment and Management: This section assesses the expertise of data center networking professionals like architects and engineers, focusing on key deployment concepts. Topics include Zero-touch provisioning (ZTP), which automates device setup in data centers without manual input.

Topic 2

VXLAN: This part requires knowledge of VXLAN, particularly how the control plane manages communication between devices, while the data plane handles traffic flow. Demonstrate knowledge of how to configure, Monitor, or Troubleshoot VXLAN.

Topic 3

Data Center Interconnect: For Data Center Engineers, this part focuses on interconnecting data centers, covering Layer 2 and Layer 3 stretching, stitching fabrics together, and using EVPN-signaled VXLAN for seamless communication between data centers.

Topic 4

EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.

Topic 5

Data Center Multitenancy and Security: This section tests knowledge of single-tenant and multitenant data center setups. Candidates such as Data Center Professionals are evaluated on ensuring tenant traffic isolation at both Layer 2 and Layer 3 levels in shared infrastructure environments.

>> JN0-683 Study Guide <<

JN0-683 real test engine & JN0-683 exam training vce & JN0-683 practice torrent

The operation of our JN0-683 exam torrent is very flexible and smooth. Once you enter the interface and begin your practice on our windows software. You will easily find there are many useful small buttons to assist your learning. The correct answer of the JN0-683 exam torrent is below every question, which helps you check your answers. We have checked all our answers. So you can check the answers breezily. In addition, the small button beside every question can display or hide answers of the JN0-683 Test Answers. You can freely choose the two modes. At the same time, there is specific space below every question for you to make notes. So you can quickly record the important points or confusion of the JN0-683 exam guides.

Juniper Data Center, Professional (JNCIP-DC) Sample Questions (Q31-Q36):

NEW QUESTION # 31
Exhibit.

A VXLAN tunnel has been created between leaf1and Ieaf2 in your data center. Referring to the exhibit, which statement is correct?

A. Traffic sent from server1to server2 will be dropped on Ieaf2.
B. Traffic sent from server1to server2 will be tagged with VLAN ID 100 on Ieaf2 and forwarded to server2.
C. Traffic sent from server1to server2 will be dropped on leaf1.
D. Traffic sent from server1to server2 will be tagged with VLAN ID 200 on Ieaf2 and forwarded to server2.

Answer: D

Explanation:
* Understanding VXLAN Tunneling:
* VXLAN (Virtual Extensible LAN) is a network virtualization technology that addresses the scalability issues associated with traditional VLANs. VXLAN encapsulates Ethernet frames in UDP, allowing Layer 2 connectivity to extend across Layer 3 networks.
* Each VXLAN network is identified by a unique VXLAN Network Identifier (VNI). In this exhibit, we have two VNIs, 5100 and 5200, assigned to the VXLAN tunnels between leaf1 and leaf2.
* Network Setup Details:
* Leaf1:Connected to Server1 with VLAN ID 100 and associated with VNI 5100.
* Leaf2:Connected to Server2 with VLAN ID 200 and associated with VNI 5200.
* Spine:Acts as the interconnect between leaf switches.
* Traffic Flow Analysis:
* When traffic is sent from Server1 to Server2, it is initially tagged with VLAN ID 100 on leaf1.
* The traffic is encapsulated into a VXLAN packet with VNI 5100 on leaf1.
* The packet is then sent across the network (via the spine) to leaf2.
* On leaf2, the VXLAN header is removed, and the original Ethernet frame is decapsulated.
* Leaf2 will then associate this traffic with VLAN ID 200 before forwarding it to Server2.
* Correct Interpretation of the Exhibit:
* The traffic originating from Server1, which is tagged with VLAN ID 100, will be encapsulated into VXLAN and transmitted to leaf2.
* Upon arrival at leaf2, it will be decapsulated, and since it is associated with VNI 5200 on leaf2, the traffic will be retagged with VLAN ID 200.
* Therefore, the traffic will reach Server2 tagged with VLAN ID 200, which matches the network configuration shown in the exhibit.
* Data Center References:
* This configuration is typical in data centers using VXLAN for network virtualization. It allows isolated Layer 2 segments (VLANs) to be stretched across Layer 3 boundaries while maintaining distinct VLAN IDs at each site.
* This approach is efficient for scaling large data center networks while avoiding VLAN ID exhaustion and enabling easier segmentation.
In summary, the correct behavior, as per the exhibit and the detailed explanation, is that traffic sent from Server1 will be tagged with VLAN ID 200 when it reaches Server2 via leaf2. This ensures proper traffic segmentation and handling across the VXLAN-enabled data center network.

NEW QUESTION # 32
You are implementing VXLAN broadcast domains in your data center environment. Which two statements are correct in this scenario? (Choose two.)

A. Layer 2 frames are encapsulated by the source VTEP.
B. The VNI is a 16-bit value and can range from 0 through 16.777.215.
C. The VNI must match the VLAN tag to ensure that the remote VTEP can decapsulate VXLAN packets.
D. A VXLAN packet does not contain a VLAN ID.

Answer: A,D

Explanation:
* VXLAN Overview:
* VXLAN (Virtual Extensible LAN) is a network virtualization technology that encapsulates Layer
2 Ethernet frames into Layer 3 UDP packets for transmission over an IP network. It allows the creation of Layer 2 overlay networks across a Layer 3 infrastructure.
* Understanding VXLAN Components:
* VTEP (VXLAN Tunnel Endpoint):A VTEP is responsible for encapsulating and decapsulating Ethernet frames into and from VXLAN packets.
* VNI (VXLAN Network Identifier):A 24-bit identifier used to distinguish different VXLAN segments, allowing for up to 16 million unique segments.
* Correct Statements:
* C. Layer 2 frames are encapsulated by the source VTEP:This is correct. In a VXLAN deployment, the source VTEP encapsulates the original Layer 2 Ethernet frame into a VXLAN packet before transmitting it over the IP network to the destination VTEP, which then decapsulates it.
* A. A VXLAN packet does not contain a VLAN ID:This is correct. The VXLAN header does not carry the original VLAN ID; instead, it uses the VNI to identify the network segment. The VLAN ID is local to the switch and does not traverse the VXLAN tunnel.
* Incorrect Statements:
* B. The VNI must match the VLAN tag to ensure that the remote VTEP can decapsulate VXLAN packets:This is incorrect. The VNI is independent of the VLAN tag, and the VLAN ID does not need to match the VNI. The VNI is what the remote VTEP uses to identify the correct VXLAN segment.
* D. The VNI is a 16-bit value and can range from 0 through 16,777,215:This is incorrect because the VNI is a 24-bit value, allowing for a range of 0 to 16,777,215.
Data Center References:
* VXLAN technology is critical for modern data centers as it enables scalability and efficient segmentation without the constraints of traditional VLAN limits.

NEW QUESTION # 33
Exhibit.

You are deploying a VXLAN overlay with EVPN as the control plane in an ERB architecture.
Referring to the exhibit, which three statements are correct about where the VXLAN gateways will be placed?
(Choose three.)

A. Only the border and leaf devices will have L3 VXLAN gateways.
B. Spine devices will have no VXLAN gateways.
C. Only the spine devices will have L2 VXLAN gateways.
D. All leaf devices will have L2 VXLAN gateways.
E. All leaf devices will have L3 VXLAN gateways.

Answer: B,D,E

Explanation:
* Understanding ERB Architecture:
* ERB (Edge Routed Bridging) architecture is a network design where the routing occurs at the edge (leaf devices) rather than in the spine devices. In a VXLAN overlay network with EVPN as the control plane, leaf devices typically act as both Layer 2 (L2) and Layer 3 (L3) VXLAN gateways.
* Placement of VXLAN Gateways:
* Option B:All leaf devices will have L2 VXLAN gateways to handle the bridging of VLAN traffic into VXLAN tunnels.
* Option C:All leaf devices will also have L3 VXLAN gateways to route traffic between different VXLAN segments (VNIs) and external networks.
* Option E:Spine devices in an ERB architecture generally do not function as VXLAN gateways.
They primarily focus on forwarding traffic between leaf nodes and do not handle VXLAN encapsulation/decapsulation.
Conclusion:
* Option B:Correct-All leaf devices will have L2 VXLAN gateways.
* Option C:Correct-All leaf devices will have L3 VXLAN gateways.
* Option E:Correct-Spine devices will not act as VXLAN gateways

NEW QUESTION # 34
You are asked to deploy 100 QFX Series devices using ZTP Each OFX5120 requires a different configuration. In this scenario, what are two components that you would configure on the DHCP server?
(Choose two.)

A. the IP address of the FTP server
B. the MAC address for each OFX5120
C. the MAC address of the FTP server
D. the management IP address for each OFX5120

Answer: B,D

NEW QUESTION # 35
Exhibit.

You want to enable the border leaf device to send Type 5 routes of local networks to the border leaf device in another data center. What must be changed to the configuration shown in the exhibit to satisfy this requirement?

A. Move vrf-target target: 65000:1 to the evpn hierarchy.
B. Add a VLAN configuration with an 13-interface to the tenant1 routing instance.
C. Add encapsulation vxlan to the evpn hierarchy.
D. Change: 5001 in the route-distinguisher to : 10010.

Answer: A

Explanation:
In this scenario, you want the border leaf device to advertise Type 5 EVPN routes to another border leaf in a different data center. Type 5 routes in EVPN are used to advertise IP prefixes, which means that for proper route advertisement, you need to configure the correct settings within the evpn hierarchy.
Step-by-Step Analysis:
* Understanding EVPN Type 5 Routes:
* EVPN Type 5 routes are used to advertise IP prefixes across EVPN instances, which allow different data centers or networks to exchange routing information effectively.
* VRF Target Setting:
* The vrf-target configuration is crucial because it defines the export and import policies for the VRF within the EVPN instance. For EVPN Type 5 routes to be advertised to other border leaf devices, the vrf-target needs to be correctly configured under the evpn hierarchy, not just within the routing instance.
Command to solve this:
move vrf-target target:65000:1 to evpn
* Other Options:
* Option B:Adding a VLAN configuration would not address the requirement to advertise Type 5 routes.
* Option C:Adding VXLAN encapsulation may be necessary for other scenarios but does not directly address the Type 5 route advertisement.
* Option D:Changing the route-distinguisher will differentiate routes but does not impact the advertisement of Type 5 routes to other data centers.
By moving the vrf-target to the evpn hierarchy, you enable the proper route advertisement, ensuring that the Type 5 routes for local networks are shared with other data center border leaf devices. This is aligned with best practices for multi-data center EVPN implementations, which emphasize the correct placement of routing policies within the EVPN configuration.

NEW QUESTION # 36
......

ActualCollection is a convenient website to provide training resources for JN0-683 professionals to participate in the certification exam. ActualCollection have different training methods and training courses for different candidates. With these ActualCollection's targeted training, the candidates can pass the exam much easier. A lot of people who participate in the JN0-683 professional certification exam was to use ActualCollection's practice questions and answers to pass the exam, so ActualCollection got a high reputation in the JN0-683 industry.

New Guide JN0-683 Files: https://www.actualcollection.com/JN0-683-exam-questions.html

P.S. Free 2025 Juniper JN0-683 dumps are available on Google Drive shared by ActualCollection: https://drive.google.com/open?id=11CXE9uQzVu-nRulqF-hyu09orF_-juHz

Joe Stone Joe Stone

Biography

Quick Links

Resources

Support

Joe Stone Joe Stone

Biography

Quick Links

Resources

Support

Pin It on Pinterest